014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Industriële pneumatische oliepompen Those are suitable for the

Those are suitable for the supply at high pressure of all kinds of grease at short and long distance

The user can calibrate it according to the different units of measurement (litres

They allow an optimal placing in every working environment (factories and repair shops) allowing to operate in a clean and safe way and without wasting of lubricant oils for different uses

Suitable for the dispensing of low and high viscosity oils (SAE 15-220)

014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Industriële pneumatische oliepompen Those are suitable for theIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.